搜索结果: 1-7 共查到“工程结构 Modelling”相关记录7条 . 查询时间(0.312 秒)
Simulation and Modelling of Smart Beams with Robust Control Subjected to Wind Induced Vibration
Smart Structures Finite Element Formulation Uncertainty Robust Performance Reduced Order Control
2013/1/31
This paper presents some recent developments in modelling and numerical analysis of piezoelectric systems and controlled smart structures based on a ?nite element formulation with embedded control. Th...
Modelling of the Stresses and Strains Distribution in an RCC Pavement Using the Computer Code“Abaqus”
Distribution RCC
2010/3/5
The Roller Compacted Concrete (RCC) pavements are built employing the Portland cement. The design of the rigid RCC pavements was developed gradually through methods of design. These methods were estab...
Response spectrum modelling for regions lacking earthquake records
Seismic design response spectrum Component Attenuation Model moderate seismicity regions
2009/2/20
The design response spectrum is typically the starting point of most codified seismic design and assessment procedures and is predominantly used to prescribe the applied inertia forces induced by eart...
Non-linear analysis of dowelled timber connections: a new approach for embedding modelling
Non linear analysis Dowelled timber connection Finite-element method Contact
2009/2/18
finite element modelling is developed to analyse the behaviour of timber connections taking into account the plastic behaviour of the timber beneath the fasteners. The local non linearities control t...
Modelling reinforced concrete structures subjected to impulsive loading using concrete lattice model
structures impulsive loading concrete lattice model
2009/1/14
A two-dimensional behavioral rate dependent lattice model (RDLM) capable of analyzing reinforced concrete members subjected to impulsive loading is presented. As a result of the impulsive loads reachi...
Simplified Finite Element Modelling of Multi-storey Buildings: The Use of Equivalent Cubes
Multi-storey Buildings Equivalent Cubes
2009/1/14
Finite element modelling is frequently used to overcome experimental limitations in predicting and analysing the performance of structures. However, constrained by software restrictions, 3-D analysis ...
nD modelling in the development of cast in place concrete structures
product modelling cast in place concrete nD
2010/9/28
The Swedish IT-stomme (IT-structure) project is a two year research project, which is aimed at applying product models in practice and developing modelling tools for cast in place concrete structures....