搜索结果: 1-7 共查到“无机非金属材料 carbon”相关记录7条 . 查询时间(0.09 秒)
Despite the many advantages of concrete as a modern construction material, including its high strength, low cost, and ease of manufacture, its production currently accounts for approximately 8 percent...
Physical properties and haemocompatibility of passive-carbon layer
Electrical properties Biomaterials Surface treatment
2010/1/19
Purpose: In the paper physical (surface topography, electrical properties) and antithrombogenic properties of
the passive-carbon layer used for enhancing the surface properties of vascular stents mad...
Analysis of carbon partitioning during ausferritic reaction in ADI
Retained austenite Ausferrite Austempering Ductile iron
2011/3/15
The investigation was carried out to examine the influence of temperature and times of austempering process on the maximum extend to which the ausferritic reaction can proceed and the carbon content i...
Amorphous carbon layers on polymeric substrates
Amorphous materials Engineering polymers C:N:H layers
2010/2/9
Purpose: This paper is aimed to study an effect of nitrogen incorporation on the structure and tribological properties of amorphous a C:N:H layers grown on polycarbonate substrates.
Design/methodolog...
Coatings Produced in Aluminium Bath on High-Carbon Alloys with Additions of Chromium and Nickel
Aluminising Morphplogy Chemical composition Microhardness Fe-C-Cr alloys
2011/3/11
In this study the problem of coatings produced in liquid aluminium on high-carbon Fe-C-Cr and Fe-C-Ni alloys has been discussed. Aluminising has been carried out at temperatures of 710oC and 745oC dur...
Analysis of Carbon Diffusion during Bainite Transformation in ADI
Carbon diffusion Decarburisation Bainite Ductile iron ADI
2011/3/11
The paper presents an investigation of the time required for the diffusion of carbon out of supersaturated sub-units of ferrite into the retained austenite. The analytical model estimates the decarbur...
The influence of the Ni layer covering carbon fibre on the AK132 matrix structure
composites carbon fibre metal cover simulation of solidifying
2011/3/11
The quality and the quantity assessment of the structure of the AlSi13Cu2 alloy matrix composites reinforced with carbon fibre in the amount of 5, 10, or 15 vol. percent has been presented.