搜索结果: 1-15 共查到“材料科学 fracture”相关记录17条 . 查询时间(0.078 秒)
Welcome to the 20th European Conference on Fracture
the 20th European Conference Fracture
2013/10/12
In the first week of July 2014, Norway is hosting the Twentieth European Conference on Fracture (ECF20, www.ecf20.no), which belongs to the well-established series of Biennial International Conference...
Two-dimensional finite element simulation of fracture and fatigue behaviours of alumina microstructures for hip prosthesis
alumina crack finite element fatigue fracture ceramic microstructure
2012/4/19
This paper describes a two-dimensional (2D) finite element simulation for fracture and fatigue behaviours of pure alumina microstructures such as those found at hip prostheses. Finite element models a...
Modelling of fracture process in concrete reinforced structures under steel corrosion
Modelling fracture process concrete reinforced structures steel corrosion
2010/8/12
Development of non-destructive methods of rebar corrosion control in a reinforced concrete is essentially important for a practice. Of the known approaches the most prospective are regarded those base...
Influence of thermal activation on changes of mechanical properties and tensile fracture morphology surface of Ni-base metallic glasses
Amorphous materials Relaxation Crystallization of metallic glasses Mechanical properties Fracture morphology
2010/8/17
The metallic glasses, obtained in a result of fast cooling from the liquid state, show thermodynamic unbalance. Thermal activation of metallic glasses leads to the structural changes, which in the fin...
Fracture analysis of selected magnesium alloys after different testing methods
Mechanical properties Magnesium alloys Tensile and torsion tests
2010/2/9
Purpose: of this paper is to extend a complex evaluation of magnesium alloys which requires very often knowledge mechanical properties. These properties are connected with microstructure that is influ...
Effect of heat treatment on tensile and fracture toughness properties of 6082 alloy
Metallic alloys Fracture mechanics Mechanical properties
2009/12/14
Purpose: The present study investigates the effect of heat treatment parameters (temperature and time) on the tensile properties and fracture toughness of 6082 aluminium alloy.
Design/methodology/app...
华南理工大学材料科学与工程导论课件Lecture-4 Mechanical properties of materials and fracture behavior
华南理工大学 材料科学与工程导论 课件 Lecture-4 Mechanical properties materials fracture behavior
2009/12/7
华南理工大学材料科学与工程导论课件Lecture-4 Mechanical properties of materials and fracture behavior。
Effect of retained austenite on the fracture toughness of tempered tool steel
Tool materials Fracture toughness Retained austenite
2009/12/2
Purpose: This paper is an attempt of reviewing the outlooks about the favourable influence of retained austenite
on fracture toughness of tool steels according to results of investigation concerning ...
Shear strain localisation and fracture in high strength structural materials
Metallic alloys Plastic deformation Strain localisation and fracture
2009/12/2
Purpose: The purpose of this paper is to investigate the factors variables influencing the plastic deformation and
failure in some high strength metallic materials under high velocity impact.
Design...
Correlation between fracture morphology and mechanical properties of NANOPERM alloys
Amorphous materials Heat treatment Mechanical properties
2009/12/2
Purpose: The purpose of this paper is to present of influence of heat treatment on the changes of structure,
ductility, mechanical properties and particularly fracture morphology of the amorphous NA...
Effect of temperature on tensile fracture mechanisms of a Ni-base superalloy
Fracture mechanics Ni-base superalloy GTD-111 Tensile test Fractography
2009/12/1
Purpose: The Ni-base superalloy GTD-111 is used in manufacturing of the first stage blades of powerful gas
turbines (over 125MW). The alloy posses appropriate microstructure and high temperature prop...
Fracture mechanics parameters estimation of CCT specimens made of X 5 CrNi 18 10 steel
ductile stainless steel fracture mechanics parameters CCT specimen
2009/10/23
This study investigates fracture behaviour of specimens made of high ductile stainless steel. Investigated material was X 5 CrNi 18 10 steel and the specimens used in this investigation were prepared ...
Statistical Analysis of Fracture Strength of Composite Materials Using Weibull Distribution
Weibull distribution Rapture strength Composite materials Carbon-epoxy
2009/10/13
In this study, the fracture strength of a carbon-epoxy composite plate has been statistically analysed by Weibull distribution. Nineteen tension tests were carried out. The results obtained vary betwe...
Fracture criterion for predicting surface cracking of Ti40 alloy inhot forming processes
Ti40 alloy ductile fracture Zener-Hollomon parameter Oyane criterion critical fracture value
2010/3/17
Hot compression tests were conducted on Ti40 burn resistant titanium alloy in the temperature range of 900−1 100 ℃ and strain rate range of 0.01−10 s−1 to investigate its fracture be...
The effect of intermetallics on the fracture mechanism in AlSi1MgMn alloy
Metallic alloys Fracture mechanics Electron microscopy
2010/2/4
Purpose: Fracture toughness in aluminium alloys is one of the main obstacles to using these materials in widespread ways and, therefore, various aspects of fracture mode would be examined closely, poi...