搜索结果: 1-8 共查到“口腔医学 Denture base resin”相关记录8条 . 查询时间(0.14 秒)
Influence of Polishing of Denture Base Resin and Metal Surfaces on Wettability with Water and Saliva
Denture base materials Surface roughness Contact angle
2009/9/14
The purpose of this study was to investigate the influence of the surface roughness of denture base resin and metal on wettability with water and saliva.
Solid specimens were produced using heat-curi...
Effect of Adhesive Primer Developed Exclusively for Heat-curing Resin on Adhesive Strength between Plastic Artificial Tooth and Acrylic Denture Base Resin
Adhesive primer Adhesion Artificial tooth
2009/9/14
Despite progress in the development of denture base resin and artificial tooth materials, dental clinics are still plagued with artificial teeth falling off the denture base - due to poor bond strengt...
Reinforcement of Denture Base Resin with Short-rod Glass Fiber
Short-rod glass fiber Flexural properties Denture base resin
2009/9/14
The present study investigated the feasibility of a high short-rod fiber content in denture base resins using polymethylmethacrylate (PMMA) powder with a small particle diameter. The effects of fiber ...
The Effect of Esthetic Fibers on Impact Resistance of a Conventional Heat-cured Denture Base Resin
Fibers Impact Acrylic
2009/9/14
This study was conducted to observe the changes in impact resistance of a denture base resin reinforced with five types of fiber. E-glass, polyester, rayon, nylon 6, and nylon 6/6 fibers were cut into...
Effect of Degradation of Denture Base Resin on Bond Strength to Relining Resins
Denture base resin Relining resin Bond strength
2009/9/14
The purpose of this study was to evaluate the effect of degradation of a denture base resin on bond strength to relining resins. Denture base resin specimens were immersed under various conditions to ...
Basic Study on the Application of Novel Functional Monomers to a Denture Base Resin
Functional monomer Polymerization Mechanical Property
2009/9/11
To improve the mechanical properties and to reduce the water sorption amount of denture base resins, the polymerization characteristics of three novel fluoro-substituted monomers (MAF-TBN, MAF-MAE, MA...
Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin
Hard reline resin Methylmercaptan Shear bond strength
2009/9/11
Effects of methylmercaptan solution (MS), a volatile sulfur compound produced by gram-negative oral microorganisms, on the adhesion of reline denture resins were investigated. For this purpose, a tota...
Comparison of the Effects of Four Pre-Bonding Preparation Methods on the Bond Strength between a Multilithic Tooth and Denture Base Resin
Acrylic resins Composite dental resin Denture bases
2009/4/2
Introduction: With introducing composite teeth, their wear resistance has been well investigated, but there are few papers about their bonding to acrylic denture base resins. The aim of this study w...